Just another day at the office....

A collage of what I deal with.. In the upper left corner is part of the dashboard. They don't know why those warning lights are on as everything works properly. A new circuit board was ordered so.. On the lower left is a space where the ABS warning light bulb should be - at least I thought so.. With the switch over from old fashioned brakes to anti-lock brakes, there was a short time when chassis could be ordered without ABS. This is one of the few the company I work for has left.  You also see a white zip-tie. That is company policy to keep the lock locked as they have a tendency to unlock themselves. Of course a tire with a nail. Since it had 95 PSI it was good to go until the trailer was empty as it's not considered flat until 80 PSI. The last photo is the recap coming off. The key here is you check for "chunks" or look for the bead / belt. As you can see a very small sliver of white where the bead is showing. This tire was replaced before it got on the road...

A much better day with a mix of physical and mental work.. Headed to Portland tomorrow..